VICTOR 140 Clamp Leaker Function Measurement Of AC Leakage Current, AC Current And On-Line AC Current Four Bits LCD Display
Introduction
VICTOR140 High Accuracy Clamp Leaker is specially designed for measurement of AC leakage current; by adopting up-to-date CT technology
and digital integration technology, it is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world.
The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments.
Clamp core of VICTOR140 High Accuracy Clamp Leaker adopts special alloy; in addition, with utilization of magnetic shielding technology, it is basically free from influences of external magnetic field so as to ensure high precision, high stability and high reliability of perennial continuous measurement.
VICTOR140 High Accuracy Clamp Leaker could be used for AC Line current measurement and on-line current measurement with voltage lower than
AC600V; it also have those functions as peaking holding, data holding and data storage; with convenient use, it is an essential tool for electrician safety testing.
Technical specifications
| Function |
Measurement of AC leakage current, AC current and on-line AC current |
| Power |
DC3V Button-type battery LR-44×2 or SR-44×2 |
| Test Mode |
Clip-on CT,integral mode |
| Display Mode |
Four Bits LCD display |
| Dimension |
Width × Height× Thickness:
64mm×160mm×23mm
|
| LCD Dimension |
35mm×21.5mm；display domain:32mm×15mm |
| Clamp Mouth |
φ40mm |
| Sampling Rate |
about 2 times/s |
| Range |
0.00mA～300.0A(50/60Hz) |
| Resolution |
0.01mA
|
Technical specifications(Continuous form)
| Measuring range |
30mA/300mA,30A/300A,second-range manual switch,Automatic switch in all ranges |
|
Measurement accuracy
(below 23℃±1℃,
70%RH)
|
0.00mA～9.99mA: ±1.2%±5dgt |
| 10.0mA～300.0mA: ±1.5%±5dgt |
| 0.00A～9.99A: ±1.2%±5dgt |
| 10.0A～99.9A: ±1.5%±5dgt |
| 100.0A～199.9A: ±2%±5dgt |
| 200.0A～300.0A: ±4%±5dgt |
| Line voltage |
Line test under AC600V |
| Data Storage |
60 groups, “FU” symbol flickering means storage is full |
| Peak Holding |
Peak value capture and holding function, pressHOLD button continually to show peak value in the course of testing. |
| Data Holding |
Data holding function:displayed by “DH” symbol |
| Overflow display |
Outrange overflow display:displayed by “OL” symbol
|
Technical specifications(Continuous form)
| Automatic shutdown |
After starting up the leaker for 5 minutes, it will shut down automatically to reduce battery consumption. |
| Battery voltage |
When battery voltage reduced to 2.5V～2.7V, battery low voltage symbol will filker to remind replacing battery; at this time, measurement accuracy will decrease. |
| Leaker Quality |
About 120g(with battery) |
| Rating Power |
about 5mW |
| Working temperature and humidity |
-0℃～40℃；below 80%rh |
| Storage temperature and humidity |
-10℃～60℃；below 70%rh |
| Insulation strength |
AC2kV/rms (between core and box) |
| Applicable safety rules |
IEC1010-1,IEC1010-2-032,pollution, etc 2,CAT Ⅲ(600V) |
Product Tags:
|
|
Clamp Leaker Function Measurement Of AC Leakage Current, AC Current And On-Line AC Current Four Bits LCD Display Images
|
